roseball
04-03 02:49 PM
I have the RFE, it doesn't state the exact instead mentions 12 weeks from the date of this letter. And the date of the letter is Jan 8, 2008
Just have them reply to the RFE at the earliest...Usually, they take a few days after the deadline to re-process the case...They might consider your reply, even if its late by a few days, if they already did not take action/deny your petition....If they already denied your petition before the response reaches them, they you will have to file a MTR, which takes quite a while and also you cannot use I-485 benefits till a decision is made....Also, make sure a cover letter is sent along with the response mentioning the reason for the delay (like u said substantial changes to company financials)....Bottomline, reply at the earliest....Good luck.....
Just have them reply to the RFE at the earliest...Usually, they take a few days after the deadline to re-process the case...They might consider your reply, even if its late by a few days, if they already did not take action/deny your petition....If they already denied your petition before the response reaches them, they you will have to file a MTR, which takes quite a while and also you cannot use I-485 benefits till a decision is made....Also, make sure a cover letter is sent along with the response mentioning the reason for the delay (like u said substantial changes to company financials)....Bottomline, reply at the earliest....Good luck.....
hsingh82
04-27 05:06 PM
Dear Sabeesh,
Although I'm not a lawyer, I will respond based on my knowledge and my own case.
1) You don't need to stamp any visa as you already have a visa that is valid until September, before your return date.
2) You will only be able to enter the US with the latest visa stamped on your passport.
3) You may want to get a new visa (associated with Company C) while you're still in India, so it will be valid until Nov 2011. You can have this new visa issued and stamped even before your current visa expires.
Regards.
If the new visa is not granted or somehow one goes into 221(g) waiting for some check, what happens then? Can you still come back on current visa?
Thanks.
Although I'm not a lawyer, I will respond based on my knowledge and my own case.
1) You don't need to stamp any visa as you already have a visa that is valid until September, before your return date.
2) You will only be able to enter the US with the latest visa stamped on your passport.
3) You may want to get a new visa (associated with Company C) while you're still in India, so it will be valid until Nov 2011. You can have this new visa issued and stamped even before your current visa expires.
Regards.
If the new visa is not granted or somehow one goes into 221(g) waiting for some check, what happens then? Can you still come back on current visa?
Thanks.
chanduv23
10-02 02:04 PM
^^^^^^^^^^
chanduv23
07-11 03:06 PM
I am seriouly looking out for a job as currently on bench from last one month and my employer doesn't pay the bench salary. Currently I am on EAD with my GC sponsering employer. I would appreciate if any of you pls. reply this post. My question is,
If I joined a new employer using EAD-AC21 (as 11 month passed of my I-485) which is very small employer (currently have about 35 employees only), would it cause a problem in my GC process approval? I mean, do you think USCIS may create any RFC as I have join the very small employer, may ask any financial document to declare? Can you pls. tell me what are the potential problems my come in this situation?
Pls. help, your reply will be highly appreciable?
As long as you are employed, and company is paying you decent salary (atleast salary mentioned on the L/C) you are fine, you must be employed at time of RFE/NOID etc..
If I joined a new employer using EAD-AC21 (as 11 month passed of my I-485) which is very small employer (currently have about 35 employees only), would it cause a problem in my GC process approval? I mean, do you think USCIS may create any RFC as I have join the very small employer, may ask any financial document to declare? Can you pls. tell me what are the potential problems my come in this situation?
Pls. help, your reply will be highly appreciable?
As long as you are employed, and company is paying you decent salary (atleast salary mentioned on the L/C) you are fine, you must be employed at time of RFE/NOID etc..
more...
vinay076
10-31 10:27 AM
Its been more than 90 days for me and I don't have even a receipt no.Lawyer says that things have been delayed. Can it be delayed so much that I don't have even receipt no ? :confused:
pani_6
11-16 04:15 PM
Celebrated for Krishna killing of the evil Narakasura.Unfortunately..this has become commercial like chirstmas and people forget the real reason and start interpreting thier own stories..it also marks Ram's return to Ayodhya after defeating Ravan.
more...
Munna Bhai
05-08 10:31 AM
http://www.telegraph.co.uk/news/main.jhtml?xml=/news/2007/05/06/wchina06.xml
Atleast home countries recognize our potential.
Atleast home countries recognize our potential.
amslonewolf
08-21 11:03 AM
Is calling them and paying by the minute any better at getting an appointment..
more...
Sachin_Stock
09-18 10:29 AM
Healthcare reforms and their covering of "illegal aliens" in question.
Both are non-issue in this forum!
Both are non-issue in this forum!
lost
01-27 02:07 PM
We need to have a massive participation for our question to get noticed........and today is already Thrusday!
more...
NELLAIKUMAR
01-26 02:31 PM
racism is considered sexy these days ;)
If someone beats you up in the street corner because of racism, then come back here and tell everyone whether it is sexy or not. :D
If someone beats you up in the street corner because of racism, then come back here and tell everyone whether it is sexy or not. :D
smitin_2000
02-09 11:34 PM
Hi,
I have issue with I-94 as visa office at LA - LAX port of entry put a date in I-94 as same as in visa stamp in passport and not the date in the I-797 (extended H1B approval notice), I realised it 2months after the I-94 expiry, means while I was moved to Bay Area in CA, so I took infopass appointment from uscis.gov site for San Francisco office, went there and explained the matter to the visa officer, they corrected the error and issued me new I-94 with the date in I-797, you can also try the same, I think your issue will be fixed.
Best of luck
CBP office location link in CA
LA - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_south_pacific.xml
San Diego - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_s_ca.xml
San Francisco - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_mid_pac.xml
Regards,
Smitin
I have issue with I-94 as visa office at LA - LAX port of entry put a date in I-94 as same as in visa stamp in passport and not the date in the I-797 (extended H1B approval notice), I realised it 2months after the I-94 expiry, means while I was moved to Bay Area in CA, so I took infopass appointment from uscis.gov site for San Francisco office, went there and explained the matter to the visa officer, they corrected the error and issued me new I-94 with the date in I-797, you can also try the same, I think your issue will be fixed.
Best of luck
CBP office location link in CA
LA - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_south_pacific.xml
San Diego - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_s_ca.xml
San Francisco - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_mid_pac.xml
Regards,
Smitin
more...
nixstor
07-12 02:47 PM
Some famous Indian Americans that I googled on. Will it be a good idea to approach / send them notes.
Politics
------
Kumar P. Barve, State legislator and Majority Leader of the Maryland House of Delegates
Satveer Chaudhary, state Senator in Minnesota.
Toby Chaudhuri, Democratic communications strategist.
Swati Dandekar, an Iowa State Representative
Dinesh D'Souza, a conservative commentator and author
Kris Kolluri, New Jersey Commissioner of Transportation.
Upendra Chivukula, state legislator (New Jersey General Assembly); first Indian-American elected to the NJ legislature.
Kamala Harris, District Attorney of San Francisco; first Indian-American elected as a D.A. in the United States. Her sister, Maya Harris, was made the Executive Director of the ACLU of Northern California in October 2006.
Bobby Jindal, U.S. Congressman from Louisiana; former gubernatorial candidate; Republican.
Raj Mukherji, New Jersey lobbyist and businessman.
Vij Pawar, New Jersey attorney and former congressional candidate.
Ramesh Ponnuru, contributing editor at the National Review, political commentator
Dalip Singh Saund, the first Indian-American congressman, was a Democratic member of the U.S. House of Representatives from California
S. R. Sidarth, Democratic campaign volunteer who sparked the George Allen "Macaca" incident.
Shashi Tharoor, Undersecretary General for Communications and Public Information for the United Nations. Candidate for UN general secretary post
Sanjay Puri, Chairman of USINPAC & USIBA
Nikki Haley, South Carolina legislator
Rachel Paulose first woman to become a U.S. Attorney in Minnesota, US Attorney for the District of Minnesota
Sameer Kanal, Democratic National Convention 2004 delegate for Howard Dean from Washington.
Dr. Joy Cherian Appointed by President Reagan to be first Asian and Indian American to head the Equal Employemnt Opportunity Commission (EEOC) in 1987
Thanks for googling this list up. USINPAC tried to portray us as Emigration voice and we will ask them for help. :(
Guys on the list of Howard Dean/ S R Siddharth etc cannot help us with our cause. The irony is they dont relate our cause at all, because we neither have right to vote nor the right to contribute to their democratic national committee funds
B T W one andhrite from Detroit gave 1 mil USD to clintons for gracing TANA 2007. I don't know if he is a consulting company owner or a doctor but many andhrites run consulting companies and they would not love us to be freed :)
Politics
------
Kumar P. Barve, State legislator and Majority Leader of the Maryland House of Delegates
Satveer Chaudhary, state Senator in Minnesota.
Toby Chaudhuri, Democratic communications strategist.
Swati Dandekar, an Iowa State Representative
Dinesh D'Souza, a conservative commentator and author
Kris Kolluri, New Jersey Commissioner of Transportation.
Upendra Chivukula, state legislator (New Jersey General Assembly); first Indian-American elected to the NJ legislature.
Kamala Harris, District Attorney of San Francisco; first Indian-American elected as a D.A. in the United States. Her sister, Maya Harris, was made the Executive Director of the ACLU of Northern California in October 2006.
Bobby Jindal, U.S. Congressman from Louisiana; former gubernatorial candidate; Republican.
Raj Mukherji, New Jersey lobbyist and businessman.
Vij Pawar, New Jersey attorney and former congressional candidate.
Ramesh Ponnuru, contributing editor at the National Review, political commentator
Dalip Singh Saund, the first Indian-American congressman, was a Democratic member of the U.S. House of Representatives from California
S. R. Sidarth, Democratic campaign volunteer who sparked the George Allen "Macaca" incident.
Shashi Tharoor, Undersecretary General for Communications and Public Information for the United Nations. Candidate for UN general secretary post
Sanjay Puri, Chairman of USINPAC & USIBA
Nikki Haley, South Carolina legislator
Rachel Paulose first woman to become a U.S. Attorney in Minnesota, US Attorney for the District of Minnesota
Sameer Kanal, Democratic National Convention 2004 delegate for Howard Dean from Washington.
Dr. Joy Cherian Appointed by President Reagan to be first Asian and Indian American to head the Equal Employemnt Opportunity Commission (EEOC) in 1987
Thanks for googling this list up. USINPAC tried to portray us as Emigration voice and we will ask them for help. :(
Guys on the list of Howard Dean/ S R Siddharth etc cannot help us with our cause. The irony is they dont relate our cause at all, because we neither have right to vote nor the right to contribute to their democratic national committee funds
B T W one andhrite from Detroit gave 1 mil USD to clintons for gracing TANA 2007. I don't know if he is a consulting company owner or a doctor but many andhrites run consulting companies and they would not love us to be freed :)
BharatPremi
08-30 05:42 PM
babu,
Congrats to get out from this hell and Thanks for your Promise to continue to support us.
Congrats to get out from this hell and Thanks for your Promise to continue to support us.
more...
sands_14
04-08 04:06 PM
Does it make sense for anyone to file for GC anymore from India,China.Looks it will take a person 10year on an average and paying for ED/AP will cost around 7000usd for 10 years:)
tnite
06-26 10:09 AM
what happens if the passport gets stamped and got a new I94 in the vancouver airport and no inspection after coming back to US.
what should we enter as last entry into us
Then put the Vancouver visit as the last entry.
what should we enter as last entry into us
Then put the Vancouver visit as the last entry.
more...
a_yaja
04-23 04:39 PM
Thanks a lot guys for your inputs. I hope everything goes fine.......
heard these days it is taking more then 6 months for I140 approval...........
mine was filed in marcha, 07 in the Texas processing center...........
Depends. My I-140 was filed on Nov. 7, 2006 with Texas Service Center. As a Christmas gift, on Dec. 14th, 2006 I received an RFE (because my lawyer screwed up with my letters of experience. He did not send them!). My lawyer did not even send me the RFE notice (he said "it contains confident employer information") - which was surprising - as he used to be very prompt with eveything else. To make a long story short - after 2 months, my employer complained to the law firm and the lawyer was fired. The new lawyer handling my case sent me the RFE notice and then I knew why I was not given the RFE letter. It asked for my experience letters! The new lawyer responded to the RFE notice on March 1st (just in time too - respponse was to received by March 10th or something like that). My I-140 was approved on April 17th (Easter gift?).
If you remove the 2 months wasted by the attorney, I would say that the I-140 was approved in 2 1/2 months.
heard these days it is taking more then 6 months for I140 approval...........
mine was filed in marcha, 07 in the Texas processing center...........
Depends. My I-140 was filed on Nov. 7, 2006 with Texas Service Center. As a Christmas gift, on Dec. 14th, 2006 I received an RFE (because my lawyer screwed up with my letters of experience. He did not send them!). My lawyer did not even send me the RFE notice (he said "it contains confident employer information") - which was surprising - as he used to be very prompt with eveything else. To make a long story short - after 2 months, my employer complained to the law firm and the lawyer was fired. The new lawyer handling my case sent me the RFE notice and then I knew why I was not given the RFE letter. It asked for my experience letters! The new lawyer responded to the RFE notice on March 1st (just in time too - respponse was to received by March 10th or something like that). My I-140 was approved on April 17th (Easter gift?).
If you remove the 2 months wasted by the attorney, I would say that the I-140 was approved in 2 1/2 months.
vactorboy29
02-24 03:24 PM
I agree with you that IV needs money for the good cause and it has to come from donations. All I am saying is if someone like me who is on H1B and can't fill the profile wants to reply to someone's query then IV should not be charging me for that because I have no dates in my profile. Money has to be generated but not at the cost of popularity of IV and defeating the purpose of IV as a common platform for all legal immigrants.
With all due respect, why don�t you want to update your information? As others said that this info will help us to know where we stand as a group. All of us knows we need this forum to bring new people on board with us and only way is to get them here is help them when they have difficulty but other side of coin is we need ways fund our movement to move forward .If you have better idea or thoughts just toss it here our seniors will look in that.
With all due respect, why don�t you want to update your information? As others said that this info will help us to know where we stand as a group. All of us knows we need this forum to bring new people on board with us and only way is to get them here is help them when they have difficulty but other side of coin is we need ways fund our movement to move forward .If you have better idea or thoughts just toss it here our seniors will look in that.
haifromsk@yahoo.com
10-15 04:00 PM
if RFE for w-2 USCIC will come to know- might not be the only way for USCIC to know
MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
pragir
12-11 01:57 PM
Mohit, when you invoke AC21 your job profile needs to be same as that listed on the job description on your LC. As long as your new company is willing to declare that your new job profile matches the one on your LC, you should be ok.
I am not a lawyer, please consult one.
I am not a lawyer, please consult one.
No comments:
Post a Comment